引用本文: | 雷婧宇,吕震宙,贾贝熙.含气膜孔涡轮叶片寿命可靠性设计优化中的网格参数化方法.[J].国防科技大学学报,2022,44(2):55-63.[点击复制] |
LEI Jingyu,LYU Zhenzhou,JIA Beixi.Mesh parameterization in reliability-based design optimization for the life of turbine blade with film holes[J].Journal of National University of Defense Technology,2022,44(2):55-63[点击复制] |
|
|
|
本文已被:浏览 5567次 下载 4262次 |
含气膜孔涡轮叶片寿命可靠性设计优化中的网格参数化方法 |
雷婧宇,吕震宙,贾贝熙 |
(西北工业大学 航空学院, 陕西 西安 710072)
|
摘要: |
为了自动实现含气膜孔涡轮叶片寿命的可靠性设计优化,减少其有限元计算时间成本,提出了含气膜孔涡轮叶片的非结构局部网格参数化方法。该网格参数化方法将叶片划分为参数化区域和非参数化区域,分别设计非参数化区域的网格以及参数化区域的网格控制点,更新气膜孔的形状和位置后,保持非参数化区域的网格不变,重构参数化区域的网格。相比于结构网格的全局变形方法,该方法能够在保证有限元计算精度的同时,很大程度上缩减有限元的计算时间,有效提高可靠性设计优化的效率。 |
关键词: 网格参数化 有限元分析 含气膜孔涡轮叶片 可靠性设计优化 |
DOI:10.11887/j.cn.202202007 |
投稿日期:2020-08-04 |
基金项目:国家重大科技专项资助项目(2017-Ⅳ-0009-0046) |
|
Mesh parameterization in reliability-based design optimization for the life of turbine blade with film holes |
LEI Jingyu, LYU Zhenzhou, JIA Beixi |
(School of Aeronautics, Northwestern Polytechnical University, Xi′an 710072, China)
|
Abstract: |
In order to meet the RBDO (reliability-based design optimization) requirement for the life of turbine blade with film holes by automatic programmed control, the local parameterization method was proposed on the basis of the unstructured mesh, which significantly reduces the time costs of FEA (finite element analysis). The turbine blade was separated into two regions:the parameterized region and the non-parameterized region. After the meshes of the non-parameterized region and control points of the parameterized region were completed, only the meshes of parameterized region were required to be reconstructed when the geometry of film holes was updated. Compared with the global deformation method based on the structured mesh, the proposed method dramatically reduces the time costs of FEA while ensuring the accuracy of finite element calculation, which highly improves the efficiency of RBDO. |
Keywords: mesh parameterization finite element analysis turbine blade with film hole reliability-based design optimization |
|
|
|
|
|